Not sure which print method is right for you?

We burn your artwork onto a fine mesh screen — one screen per ink color. Ink is pushed through the screen onto the garment with a squeegee, then cured under a 320°F conveyor dryer. The ink bonds into the fabric fibers, so it feels broken-in from day one and survives years of laundry.

When properly cured, screen prints typically outlast the garment itself — easily 50+ wash cycles with no meaningful fading. Wash inside-out in cold water, tumble dry low, and you're good for years.

Team shirts, event tees, brand merch, anything you're ordering 24+ pieces of with a simple, spot-color design.

Vector files preferred (.AI, .EPS, .PDF, or .SVG) with text outlined. Raster files (.PSD, .PNG) work at 300 DPI at print size. Each color must be on its own layer.

Your artwork is digitally printed onto a special PET film using CMYK + white ink, dusted with a hot-melt adhesive powder, and cured. We then heat-press the transfer onto your garment at ~310°F for 15 seconds. The result is a thin, flexible, full-color print bonded to the fabric.

40–50+ wash cycles when cared for properly. Slightly less abrasion-resistant than screen printing over the long term, but excellent for everyday wear. Wash inside-out in cold; avoid high-heat drying and ironing directly on the print.

Small runs (1–24 pieces), complex multi-color artwork, photographic prints, names & numbers, one-off custom orders.

PNG with transparent background at 300 DPI at print size. Vector files also welcome. No special color separations needed — print it like you'd post it.

We digitize your logo into a stitch file that tells the embroidery machine exactly where to place each needle. Your garment is hooped, loaded into a multi-head commercial embroidery machine, and stitched with high-quality polyester thread. A 3" logo is typically 8,000–12,000 stitches.

Effectively permanent. Thread is sewn into the garment — it cannot fade, crack, or peel. Embroidered hats and jackets routinely outlive their owners' interest in them.

Polos, hats, beanies, jackets, workwear, corporate uniforms. Anything where you want a polished, tailored, professional look.

Vector logo (.AI, .EPS, .SVG, or .PDF) at any size. We'll digitize it for you. Minimum recommended text height: 0.25".

Solid-color vinyl sheets are precision-cut to the shape of your design with a plotter, weeded (excess vinyl removed by hand), then heat-pressed onto the garment at ~305°F for 10–15 seconds. The vinyl's adhesive backing bonds permanently to the fabric.

30–50 wash cycles. Vinyl can crack or lift after years of heavy wear, especially on stretchy fabrics. Wash inside-out in cold; never iron directly on the vinyl.

Team jerseys with names and numbers on the back, single-color graphics, small runs where you need a clean, opaque finish.

Vector files (.AI, .EPS, .SVG, .PDF) with text outlined. The plotter cuts the outline of your shapes, so artwork must be solid shapes, not gradients.